• IEC 60335-2-95 Ed. 3.1 b:2015

IEC 60335-2-95 Ed. 3.1 b:2015

Household and similar electrical appliances - Safety - Part 2-95:Particular requirements for drives for vertically moving garage doors for residential use CONSOLIDATED EDITION

International Electrotechnical Commission, 01/22/2015

Publisher: IEC

File Format: PDF

$117.00$235.00


Published:22/01/2015

Pages:93

File Size:1 file , 730 KB

Note:This product is unavailable in Ukraine, Russia, Belarus

IEC 60335-2-95:2011+A1:2015 deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase appliances and 480 V for other appliances. It also covers the hazards associated with the movement of these electrically driven garage doors. This standard also applies to entrapment protection devices for use with drives. It does not cover hazards related to the mechanisms of the door itself. This standard does not apply to drives:
- for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97);
- for garage doors for use by more than one household (IEC 60335-2-103);
- for commercial and industrial purposes or
- for drives intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).
This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). It constitutes a technical revision. The principal changes in this edition as compared with the second edition of IEC 60335-2-95 are as follows (minor changes are not listed): Some notes have been converted to normative text (11.7, 20.2, 20.101); A requirement to fit an entrapment protection device has been added (22.109). The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication.

This publication is to be read in conjunction with IEC 60335-1:2013. This consolidated version consists of the third edition (2011) and its amendment 1 (2015). Therefore, no need to order amendment in addition to this publication.

More IEC standard pdf

IEC 61156-13 Ed. 1.0 en:2023

IEC 61156-13 Ed. 1.0 en:2023

Multicore and symmetrical pair/quad cables for digital communications – Part 13: Symmetrical single pair cables with transmission characteristics up to 20 MHz – Horizontal floor wiring – Sectional specification IEC

$95.00 $190.00

IEC 61076-8-108 Ed. 1.0 b:2023

IEC 61076-8-108 Ed. 1.0 b:2023

Connectors for electrical and electronic equipment – Product requirements – Part 8-108: Power connectors – Detail specification for 2P 250 A, 1 000 V plus 2P 5 A 50 V rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated

$139.00 $278.00

IEC 61784-2-18 Ed. 1.0 b:2023

IEC 61784-2-18 Ed. 1.0 b:2023

Industrial networks – Profiles – Part 2-18: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 – CPF 18

$95.00 $190.00

IEC 61784-2-16 Ed. 1.0 b:2023

IEC 61784-2-16 Ed. 1.0 b:2023

Industrial networks – Profiles – Part 2-16: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 – CPF 16

$72.00 $145.00