IEC 60364-1 Ed. 5.0 b:2005

Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions

International Electrotechnical Commission, 11/29/2005

Publisher: IEC

File Format: PDF

$164.00$329.00


Published:29/11/2005

Pages:93

File Size:1 file , 1.1 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

Gives the rules for the design, erection, and verification of electrical installations. The rules are intended to provide for the safety of persons, livestock and property against dangers and damage which may arise in the reasonable use of electrical installations and to provide for the proper functioning of those installations. IEC 60364-1 applies to the design, erection and verification of electrical installations such as those of a) residential premises; b) commercial premises; c) public premises; d) industrial premises; e) agricultural and horticultural premises; f) prefabricated buildings; g) caravans, caravan sites and similar sites; h) construction sites, exhibitions, fairs and other installations for temporary purposes; i) marinas; j) external lighting and similar installations; k) medical locations; l) mobile or transportable units; m) photovoltaic systems; n) low-voltage generating sets. IEC 60364-1 covers a) circuits supplied at nominal voltages up to and including 1 000 V a.c. or 1 500 V d.c.; b) circuits, other than the internal wiring of apparatus, operating at voltages exceeding 1 000 V and derived from an installation having a voltage not exceeding 1 000 V a.c., for example, discharge lighting, electrostatic precipitators; c) wiring systems and cables not specifically covered by the standards for appliances; d) all consumer installations external to buildings; e) fixed wiring for information and communication technology, signalling, control and the like (excluding internal wiring of apparatus); f) the extension or alteration of the installation and also parts of the existing installation affected by the extension or alteration.

More IEC standard pdf

IEC 61753-089-2 Ed. 1.0 en:2013

IEC 61753-089-2 Ed. 1.0 en:2013

Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment

$42.00 $85.00

IEC 62739-3 Ed. 1.0 b:2017

IEC 62739-3 Ed. 1.0 b:2017

Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods

$139.00 $278.00

IEC 61587-1 Ed. 4.0 b:2016

IEC 61587-1 Ed. 4.0 b:2016

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation

$155.00 $310.00

IEC 62271-4 Ed. 2.0 b:2022

IEC 62271-4 Ed. 2.0 b:2022

High-voltage switchgear and controlgear - Part 4: Handling procedures for gases for insulation and/or switching

$256.00 $512.00