IEC 60603-4 Ed. 1.0 b:1987

Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing

International Electrotechnical Commission, 03/15/1987

Publisher: IEC

File Format: PDF

$72.00$145.00

Description

Published:15/03/1987

Pages:35

File Size:1 file , 1.2 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

Applies to a group of related rectangular, multicontact, two-part printed board connectors with male and female contacts in conjunction with either solder or solderless terminations (such as wrap type). All connectors have the same contact spacing using the basic grid of 1.91 mm (0.075 in). The attachment of the connector to the printed board is accomplished with a series of cantilever solder tabs, which are distributed evenly on both sides of the board.

More IEC standard pdf

IEC 61557-16 Ed. 2.0 b:2023

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment

$95.00 $190.00

IEC 60603-4 Ed. 1.0 b:1987

Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing

More IEC standard pdf

IEC 61557-16 Ed. 2.0 b:2023

IEC 61076-8-105 Ed. 1.0 b:2023

IEC 60115-8 Ed. 3.0 b:2023

IEC 61189-2-804 Ed. 1.0 b:2023