• IEC 60947-4-1 Ed. 3.1 b:2012

IEC 60947-4-1 Ed. 3.1 b:2012

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters CONSOLIDATED EDITION

International Electrotechnical Commission, 07/20/2012

Publisher: IEC

File Format: PDF

$381.00$762.00


Published:20/07/2012

Pages:276

File Size:1 file , 2 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

IEC 60947-4-1:2009+A1:2012 applies to the types of equipment whose main contacts are intended to be connected to circuits the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c. Starters and/or contactors dealt with in this standard are not normally designed to interrupt short-circuit currents. Therefore, suitable short-circuit protection forms part of the installation but not necessarily of the contactor or the starter. This third edition replaces the second edition published in 2000 and its Amendments 1 (2002) and 2 (2005). It is a technical revision. This edition includes the following significant technical changes with respect to the previous edition (2000) and its Amendments 1 (2002) and 2 (2005):
- deletion of the test at -5 °C and +20 °C for thermal overload relays that are not compensated for ambient air temperature;
- addition of conditions of the tests according to Annex Q of IEC 60947-1;
- EMC tests: clarification of acceptance criteria and alignment with IEC 60947-1 for fast transient severity level;
- Annex B, test for Icd: modification of the duration of the dielectric test voltage from 5 s to 60 s;
- Annex B, electrical durability: improvement of the statistical aspects;
- Annex H: clarification and introduction of new extended functions within electronic overload relays;
- Annex K, procedure to determine data for electromechanical contactors used in functional safety applications: creation of this new annex. This standard shall be read in conjunction with IEC 60947-1, Low voltage switchgear and controlgear - Part 1: General rules. The provisions of the general rules are applicable to this standard, where specifically called for. This consolidated version consists of the third edition (2009) and its amendment 1 (2012). Therefore, no need to order amendment in addition to this publication.

This publication shall be read in conjunction withIEC 60947-1:2007.

More IEC standard pdf

IEC 60747-2-1 Ed. 1.0 b:1989

IEC 60747-2-1 Ed. 1.0 b:1989

Semiconductor devices - Discrete devices - Part 2: Rectifier diodes - Section One: Blank detail specification for rectifier diodes (including avalanche rectifier diodes), ambient and case-rated, up to 100 A

$22.00 $45.00

IEC 61753-111-9 Ed. 1.0 b:2009

IEC 61753-111-9 Ed. 1.0 b:2009

Fibre optic interconnecting devices and passive components performance standard - Part 111-9: Sealed closures for category S - Subterranean

$91.00 $183.00

IEC 60099-4 Ed. 2.1 b:2006

IEC 60099-4 Ed. 2.1 b:2006

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems CONSOLIDATED EDITION

$173.00 $347.00

IEC 61755-2-1 Ed. 1.0 b:2006

IEC 61755-2-1 Ed. 1.0 b:2006

Fibre optic connector optical interfaces - Part 2-1: Optical interface standard single mode non-angled physically contacting fibres

$25.00 $51.00