• IEC 61000-4-19 Ed. 1.0 b:2014

IEC 61000-4-19 Ed. 1.0 b:2014

Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports

International Electrotechnical Commission, 05/07/2014

Publisher: IEC

File Format: PDF

$139.00$278.00


Published:07/05/2014

Pages:68

File Size:1 file , 690 KB

Note:This product is unavailable in Ukraine, Russia, Belarus

IEC 61000-4-19:2014 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted, differential mode disturbances and signalling in the range 2 kHz up to 150 kHz at a.c. power ports. The object of this standard is to establish a common and reproducible basis for testing electrical and electronic equipment with the application of differential mode disturbances and signalling to a.c. power ports. This standard defines:
- test waveforms;
- range of test levels;
- test equipment;
- test setup;
- test procedures;
- and verification procedures. These tests are intended to demonstrate the immunity of electrical and electronic equipment operating at a mains supply voltage up to 280 V (from phase to neutral or phase to earth, if no neutral is used) and a frequency of 50 Hz or 60 Hz when subjected to conducted, differential mode disturbances such as those originating from power electronics and power line communication systems. The immunity to harmonics and interharmonics, including mains signalling, on a.c. power ports up to 2 kHz in differential mode is covered by IEC 61000-4-13. Emissions in the frequency range 2 kHz to 150 kHz often have both differential mode and common mode components. This standard provides immunity tests only for differential mode disturbances and signalling. It is recommended to perform common mode tests as well, which are covered by IEC 61000-4-16. Key words: electromagnetic compatibility, EMC

More IEC standard pdf

IEC 61156-11 Ed. 2.0 en:2023

IEC 61156-11 Ed. 2.0 en:2023

Multicore and symmetrical pair/quad cables for digital communications – Part 11: Symmetrical single pair cables with transmission characteristics up to 1,25 GHz – Horizontal floor wiring – Sectional specification

$117.00 $234.00

IEC 61784-2-21 Ed. 1.0 b:2023

IEC 61784-2-21 Ed. 1.0 b:2023

Industrial networks – Profiles – Part 2-21: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 – CPF 21

$95.00 $190.00

IEC 60728-106 Ed. 1.0 b:2023

IEC 60728-106 Ed. 1.0 b:2023

Cable networks for television signals, sound signals and interactive services – Part 106: Optical equipment for systems loaded with digital channels only

$164.00 $329.00

IEC 61980-2 Ed. 1.0 b:2023

IEC 61980-2 Ed. 1.0 b:2023

Electric vehicle wireless power transfer (WPT) systems – Part 2: Specific requirements for MF-WPT system communication and activities

$227.00 $455.00