IEC 61162-1:2010 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. Is intended to support one-way serial data transmission from a single talker to one or more listeners. This data is in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2. The main changes with respect to the previous edition are listed below:
- certain sentences have been removed as they are not used by other standards prepared by technical committee 80;
- new sentences have been added; corrections have been made to certain sentences (ABK, BBM, DOR, FIR, SSD, TUT, and VTG);
- new fields have been added to certain sentences;
- three additional tests have been added to Annex B. The contents of the corrigendum of December 2013 have been included in this copy.
- certain sentences have been removed as they are not used by other standards prepared by technical committee 80;
- new sentences have been added; corrections have been made to certain sentences (ABK, BBM, DOR, FIR, SSD, TUT, and VTG);
- new fields have been added to certain sentences;
- three additional tests have been added to Annex B. The contents of the corrigendum of December 2013 have been included in this copy.
More IEC standard pdf
IEC 60384-15 Amd.1 Ed. 1.0 b:1987
Amendment 1 - Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
$6.00 $12.00
IEC 60603-4 Ed. 1.0 b:1987
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing
$72.00 $145.00
IEC 60115-6 Amd.1 Ed. 1.0 b:1987
Amendment 1 - Fixed resistors for use in electronic equipment - Part 6: Sectional specification - Fixed resistor networks with individually measurable resistors
$6.00 $13.00
IEC 60068-2-20 Amd.2 Ed. 4.0 b:1987
Amendment 2 - Environmental testing. Part 2: Tests. Test T: Soldering
$9.00 $19.00