• IEC 61280-4-1 Ed. 2.0 b:2009

IEC 61280-4-1 Ed. 2.0 b:2009

Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement

International Electrotechnical Commission, 06/10/2009

Publisher: IEC

File Format: PDF

$176.00$352.00


Published:10/06/2009

Pages:126

File Size:1 file , 960 KB

Note:This product is unavailable in Ukraine, Russia, Belarus

IEC 61280-4-1:2009 is applicable to the measurement of attenuation of installed fibre-optic cabling using multimode fibre, typically in lengths of up to 2 000 m. This cabling can include multimode fibres, connectors, adapters and splices. In this standard, the fibre types that are addressed include category A1a (50/125 µm) and A1b (62,5/125 µm) multimode fibres, as specified in IEC 60793-2-10. The attenuation measurements of the other multimode categories can be made, using the approaches of this standard, but the source conditions for the other categories have not been defined. The main changes with respect to the previous edition are:
- An additional measurement method based on optical time domain reflectometry (OTDR) is documented, with guidance on best practice in using the OTDR and interpreting OTDR traces.
- The requirement for the sources used to measure multimode fibres is changed from one based on coupled power ratio (CPR) and mandrel requirement to one based on measurements of the near field at the output of the launching test cord.
- Highlighting the importance of, and giving guidance on, good measurement practices including cleaning and inspection of connector end faces.

More IEC standard pdf

IEC 60099-6 Ed. 2.0 b:2019

IEC 60099-6 Ed. 2.0 b:2019

Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures - System voltage of 52 kV and less

$208.00 $417.00

IEC 60721-3-4 Ed. 3.0 b:2019

IEC 60721-3-4 Ed. 3.0 b:2019

Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations

$47.00 $95.00

IEC 62629-12-2 Ed. 1.0 b:2019

IEC 62629-12-2 Ed. 1.0 b:2019

3D display devices - Part 12-2: Measuring methods for stereoscopic displays using glasses - Motion blur

$95.00 $190.00

IEC 60794-3-21 Ed. 2.0 en:2015

IEC 60794-3-21 Ed. 2.0 en:2015

Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling

$12.00 $25.00