IEC 61534-1:2011+A1:2014 specifies general requirements and tests for powertrack (PT) systems with a rated voltage not exceeding 277 V a.c. single phase, or 480 V a.c. two or three phase 50 Hz/60 Hz with a rated current not exceeding 63 A. These systems are used for distributing electricity in household, commercial and industrial premises. This second edition cancels and replaces the first edition published in 2003 and constitutes a technical revision. The main changes from the previous edition are as follows:
- updated normative references (Clause 2);
- changes to the number of samples to be tested (Subclause 5.3);
- inclusion of a short circuit test (New Clause 18);
- changes to external influences (Clause 21).
The contents of the corrigendum apply to the French version only. This consolidated version consists of the second edition (2011) and its amendment 1 (2014). Therefore, no need to order amendment in addition to this publication.
- updated normative references (Clause 2);
- changes to the number of samples to be tested (Subclause 5.3);
- inclusion of a short circuit test (New Clause 18);
- changes to external influences (Clause 21).
The contents of the corrigendum apply to the French version only. This consolidated version consists of the second edition (2011) and its amendment 1 (2014). Therefore, no need to order amendment in addition to this publication.
More IEC standard pdf
IEC 60603-4 Ed. 1.0 b:1987
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing
$72.00 $145.00
IEC 60115-6 Amd.1 Ed. 1.0 b:1987
Amendment 1 - Fixed resistors for use in electronic equipment - Part 6: Sectional specification - Fixed resistor networks with individually measurable resistors
$6.00 $13.00
IEC 60068-2-20 Amd.2 Ed. 4.0 b:1987
Amendment 2 - Environmental testing. Part 2: Tests. Test T: Soldering
$9.00 $19.00