IEC 61557-3 Ed. 2.0 b:2007

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance

International Electrotechnical Commission, 01/29/2007

Publisher: IEC

File Format: PDF

$23.00$47.00


Published:29/01/2007

Pages:19

File Size:1 file , 150 KB

Note:This product is unavailable in Ukraine, Russia, Belarus

This part of IEC 61557 specifies the requirements applicable to equipment for measuring the loop impedance between a phase conductor and the protective conductor or between a phase conductor and neutral or between two phase conductors by using the voltage drop when the circuit under test is loaded. This second edition cancels and replaces the first edition published in 1997. This edition constitutes a technical revision. The following changes were made with respect to the previous edition: a) definitions complemented; b) revision of some requirements; c) addition of information on operating instructions; d) addition of new influence quantities E9 and E10.

More IEC standard pdf

IEC 60331-1 Ed. 2.0 b:2018

IEC 60331-1 Ed. 2.0 b:2018

Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 ¿¿C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm

$117.00 $234.00

IEC 60601-2-54 Ed. 1.2 b:2018

IEC 60601-2-54 Ed. 1.2 b:2018

Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy CONSOLIDATED EDITION

$348.00 $696.00

IEC 60320-2-4 Ed. 2.0 b:2018

IEC 60320-2-4 Ed. 2.0 b:2018

Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement

$139.00 $278.00

IEC 60331-2 Ed. 2.0 b:2018

IEC 60331-2 Ed. 2.0 b:2018

Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 ¿¿C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm

$95.00 $190.00