• IEC 61587-5 Ed. 1.0 b:2013

IEC 61587-5 Ed. 1.0 b:2013

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units

International Electrotechnical Commission, 12/10/2013

Publisher: IEC

File Format: PDF

$95.00$190.00


Published:10/12/2013

Pages:49

File Size:1 file , 1.2 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

IEC 61587-5:2013 specifies seismic test requirements for chassis, subracks, and plug-in units as defined in the IEC 60297 and IEC 60917 series. It applies in whole or in part, only to the mechanical structures of chassis, subracks, and plug-in units for electronic equipment, according to the IEC 60297 and IEC 60917 series, and does not apply to electronic components, equipment or systems within the mechanical structures. The object of this standard is to establish a level of physical integrity of chassis, subracks, and plug-in units according to IEC 60297 and IEC 60917 series that may provide a level of survivability that will preserve functionality during and after a seismic occurrence. It is intended to provide the user with a high level of confidence in the selection of an equipment practice to meet such needs. Since IEC 60297 and IEC 60917 series chassis, subracks, and plug-in units come in many sizes, weights and mechanical complexities, it is not possible to define a single minimum seismic test requirement for all weight categories. Therefore, overall mass categories are defined in this standard. However, the mass distribution inside a chassis and subrack is considered "application-specific" and herein defined as "intended use". Key words: chassis, subracks, plug-in units, seismic tests

More IEC standard pdf

IEC 60335-2-88 Ed. 2.0 en:2002

IEC 60335-2-88 Ed. 2.0 en:2002

Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems

$72.00 $145.00

IEC 61280-2-9 Ed. 1.0 b:2002

IEC 61280-2-9 Ed. 1.0 b:2002

Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems

$43.00 $87.00

IEC 61754-4-1 Ed. 1.0 en:2003

IEC 61754-4-1 Ed. 1.0 en:2003

Fibre optic connector interfaces - Part 4-1: Type SC connector family - Simplified receptacle SC-PC connector interfaces

$21.00 $43.00

IEC 60915 Ed. 2.0 b:2006

IEC 60915 Ed. 2.0 b:2006

Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components

$47.00 $95.00