IEC 62271-107 Ed. 3.0 b:2019

High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV

International Electrotechnical Commission, 05/28/2019

Publisher: IEC

File Format: PDF

$183.00$367.00


Published:28/05/2019

Pages:110

File Size:1 file , 2.3 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

IEC 62271-107:2019 applies to three-pole-operated fused circuit-switchers designed with rated voltages above 1 kV up to and including 52 kV for use on three-phase alternating current systems of either 50 Hz or 60 Hz. This third edition cancels and replaces the second edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
  • a) technical changes introduced by the second edition of IEC 62271-1 are applied, where relevant;
  • b) rated TRV is removed and TRV is now treated as a test parameter), as in IEC 62271-100;
  • c) the term "thermal current" is no longer used; the rated continuous current is linked to the installed fuse-links, and values shall be provided by the manufacturer together with the list of the acceptable fuse-links; for tests purpose, the highest rated continuous current listed is referred, where previously the wording was "rated maximum thermal current", for consistency with IEC 62271-105;
  • d) making and breaking test duties are independent type tests (as some may be omitted if the switching device has been validated as a load-break switch). However, TDIt0 and TDIlow are kept as a sequence as they are linked to the same rated value (It0);
  • e) differentiation has been introduced between requirements expressed for fulfilling the function expected from a fused circuit-switcher, from requirements only relevant when the function is performed by a stand-alone device. The goal is to avoid duplication or conflicts of requirements with a standard dealing with assemblies, when the function is implemented within such an assembly.

More IEC standard pdf

IEC 60444-9 Ed. 1.0 b:2007

IEC 60444-9 Ed. 1.0 b:2007

Measurement of quartz crystal unit parameters - Part 9: Measurement of spurious resonances of piezoelectric crystal units

$47.00 $95.00

IEC 60034-14 Amd.1 Ed. 3.0 b:2007

IEC 60034-14 Amd.1 Ed. 3.0 b:2007

Amendment 1 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

$6.00 $12.00

IEC 61325 Ed. 1.0 b:1995

IEC 61325 Ed. 1.0 b:1995

Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria

$164.00 $329.00

IEC 61082-1 Amd.1 Ed. 1.0 b:1995

IEC 61082-1 Amd.1 Ed. 1.0 b:1995

Amendment 1 - Preparation of documents used in electrotechnology - Part 1: General requirements

$14.00 $28.00