IEC 62980 Ed. 1.0 b:2022

Parasitic communication protocol for radio-frequency wireless power transmission

International Electrotechnical Commission, 09/01/2022

Publisher: IEC

File Format: PDF

$164.00$329.00


Published:01/09/2022

Pages:92

File Size:1 file , 5 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

This document defines procedures for transferring power to non-powered IoT devices using the existing ISM band communication infrastructure and RF WPT and a protocol for a two-way, long-distance wireless network in which IoT devices and APs communicate using backscatter modulation of ISM-band signals. Three components are required for two-way, long-distance wireless communication using backscatter modulation of ISM-band signals:
• an STA that transmits wireless power and data packets to SSNs by forming ISM-band signal channels between HIE-APs,
• a battery-free SSN that changes the sensitivity of the channel signals received from the STA using backscatter modulation, and
• an HIE-AP that practically decodes the channel signals whose sensitivity was changed by the SSN.

In this document, the procedures for CW-type RF WPT using communication among these three components are specified based on application of the CSI or RSSI detection method of ISM-band communication.

This document proposes a convergence communication protocol than can deploy sensors, which can operate at low power (dozens of microwatts or less) without batteries, collect energy, and perform communication, to transmit power to SSNs using RF WPT based on parasitic communication. This method can be applied to application service areas such as domestic IoT, the micro-sensor industry, and industries related to environmental monitoring in the future.

More IEC standard pdf

IEC 61010-2-081 Ed. 2.0 b:2015

IEC 61010-2-081 Ed. 2.0 b:2015

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes

$23.00 $47.00

IEC 60127-8 Ed. 1.0 en:2018

IEC 60127-8 Ed. 1.0 en:2018

Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection

$95.00 $190.00

IEC 61010-2-101 Ed. 2.0 b:2015

IEC 61010-2-101 Ed. 2.0 b:2015

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment

$58.00 $117.00

IEC 61995-2 Ed. 1.1 b:2016

IEC 61995-2 Ed. 1.1 b:2016

Devices for the connection of luminaires for household and similarpurposes - Part 2: Standard sheets for DCL CONSOLIDATED EDITION

$69.00 $139.00