NACE AMPP SP21523-2022

Non-thermal Plasma Surface Preparation of Metals

National Association of Corrosion Engineers, 11/08/2022

Publisher: NACE

File Format: PDF

$89.00$179.00


Published:08/11/2022

Pages:23

File Size:1 file , 1.2 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

This standard contains the general requirements for the safe and effective use of APC equipment, operated either manually hand-held or through use of automation, to prepare various metallic surfaces for maintenance, repair, recoating, or lining. This standard does not address surface preparation of concrete.

APC is applied to the entire surface specified to be prepared for a new coating or lining. Poorly adhered surface material and coating that cannot withstand the APC process are removed, while, depending on the chosen cleanliness level, any remaining coating is suitably prepared prior to the application of a new coating layer over the existing. In the case of metallic substrates, the underlying surface profile will be revealed whenever surface contamination and coatings are removed.

This standard is limited to requirements for the removal of visible surface contaminants. Information on nonvisible contamination is in Appendix A (nonmandatory). Information on soluble salt testing is in SSPC-Guide 15.

Additional information on the function of APC for metallic surface preparation is in Paragraph A1 of Appendix A. Paragraphs A2, A4, and A5 of Appendix A contain existing coating considerations for project planners and managers.

More NACE standard pdf

NACE TM0374-2016

NACE TM0374-2016

Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems)

$89.00 $179.00

NACE SP0516-2016

NACE SP0516-2016

Guidelines for Data Collection and Analysis of Railroad Tank Car Interior Coating/Lining Condition

$89.00 $179.00

NACE SP0300-2016/ISO 16784-1:2006

NACE SP0300-2016/ISO 16784-1:2006

Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems

$89.00 $179.00

NACE TM0294-2016

NACE TM0294-2016

Testing of Embeddable Impressed Current Anodes for Use in Cathodic Protection of Atmospherically Exposed Steel-Reinforced Concrete

$89.00 $179.00