NACE SP0915-2015

Industrial Wet Abrasive Blast Cleaning - NACE WAB-8/SSPC-SP 14 (WAB)

National Association of Corrosion Engineers, 03/14/2015

Publisher: NACE

File Format: PDF

$89.00$179.00


Published:14/03/2015

Pages:17

File Size:1 file , 330 KB

Note:This product is unavailable in Ukraine, Russia, Belarus

A (WAB-cleaned surface is one prepared by combining water and abrasive in a blast cleaning operation by one of several methods, which include: 1) injection of water into the abrasive stream either internally or externally as the abrasive stream exits the blast nozzle; 2) injection of abrasive into pressurized water; or 3) use of an abrasive slurry under pressure to achieve the specified WAB degree of cleanliness.

This standard defines the Industrial Wet Abrasive Blast Cleaning (NACE WAB-8/SSPC-SP 14 [WAB])) degree of visible surface cleanliness of uncoated or coated steel surfaces achieved by the use of wet abrasive blast cleaning. The requirements include the end condition of the surface as determined by visual inspection, and materials and procedures used to achieve and verify the end condition.

This standard is limited to requirements for visible surface contaminants. Additional information on nonvisible contamination is provided in Paragraph A2 of Appendix A. Additional information on soluble salt testing is provided in SSPC-Guide 15.

More NACE standard pdf

NACE SP0508-2008

NACE SP0508-2008

Methods of Validating Equivalence to ISO 8502-9 on Measurement of the Levels of Soluble Salts

$89.00 $179.00

NACE SP0472-2008

NACE SP0472-2008

Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

$89.00 $179.00

NACE SP0208-2008

NACE SP0208-2008

Internal Corrosion Direct Assessment Methodology for Liquid Petroleum Pipelines

$89.00 $179.00

NACE SP0204-2008

NACE SP0204-2008

Stress Corrosion Cracking (SCC) Direct Assessment Methodology

$89.00 $179.00