• NACE TM0198-2004

NACE TM0198-2004

Slow Strain Rate Test Method for Screening Corrosion Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service

National Association of Corrosion Engineers, 02/12/2004

Publisher: NACE

File Format: PDF

$89.00$179.00


Published:12/02/2004

Pages:21

File Size:1 file , 220 KB

Note:This product is unavailable in Ukraine, Russia, Belarus

The SSR test incorporates a slow (compared with conventional tensile tests), dynamic strain applied at a constant extension rate. Extension rates of 2.5 x 10(-9) to 2.5 x 10(-7) m/s (1.0 x 10(-7) to 1.0 x 10(-5) in./s) are commonly used. The principal effect of the constant extension rate, in combination with environmental or corrosive attack, is to accelerate the initiation of cracking in susceptible materials. By doing so, the slow strain rate acts in much the same way as a notch or precrack in statically stressed environmental cracking tests. Failure is obtained within a few days for commonly used extension rates. Because of its relatively short test duration, the SSR test has been found useful in evaluating stainless steels and nickel-based alloys for resistance to SCC in simulated oilfield production environments at elevated temperatures. By comparison, it has been observed that it may take thousands of hours of exposure time to evaluate these materials using more conventional statically stressed specimens.

More NACE standard pdf

NACE SP0915-2015

NACE SP0915-2015

Industrial Wet Abrasive Blast Cleaning - NACE WAB-8/SSPC-SP 14 (WAB)

$89.00 $179.00

NACE SP0403-2015

NACE SP0403-2015

Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery Equipment and Piping

$89.00 $179.00

NACE TM0115-2015

NACE TM0115-2015

Cathodic Disbondment Test for Coated Steel Structures under Cathodic Protection

$89.00 $179.00

NACE SP1015-2015

NACE SP1015-2015

Brush-Off Wet Abrasive Blast Cleaning - NACE WAB-4/SSPC-SP 7 (WAB)

$89.00 $179.00