SAE AMS5962A

Nickel Alloy, Corrosion and Heat-Resistant, Round Bars and Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Treated and Work Strengthened Precipitation Hardenable

SAE International, 05/12/2022

Publisher: SAE

File Format: PDF

$35.00$71.00

Description

Published:12/05/2022

File Size:1 file , 840 KB

Note:This product is unavailable in Ukraine, Russia, Belarus

This specification covers a corrosion and heat resistant work strengthened nickel alloy in the form of bars and wire, 1 1/2 inches (38 mm) and under in nomial diameter.

These products have been used typically for parts, such as fasteners, requiring a room temperature minimum tensile strength of 220 ksi (1517 MPa) after precipitation heat treatement for use up to 900 \mDF (482 \mDC) and having oxidation resistance up to 1800 \mDF (982 \mDC), but usage is not limited to such applications.

More SAE standard pdf

SAE AS85485/6B

CABLE, ELECTRIC, FILTER LINE, COMPONENT WIRE, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, RADIO FREQUENCY ABSORPTIVE, 150 °C, 600-VOLT (Stabilized: Mar 2021)

$30.00 $60.00

SAE AIR2000F

Aerospace Fluid System Standards, Metric, National and International (Stabilized: Mar 2021)

$67.00 $135.00

SAE AMS3307E

Elastomer: Rubber, Silicone (VMQ) Non-Oil-Resistant Low Compression Set 65 - 75 Shore A Hardness

$35.00 $71.00

SAE AIR4779D

User's Guide to AMS Specifications

$38.00 $76.00