• SAE J1979-2_202104

SAE J1979-2_202104

E/E Diagnostic Test Modes: OBDonUDS

SAE International, 04/22/2021

Publisher: SAE

File Format: PDF

$78.00$156.00


Published:22/04/2021

File Size:1 file , 1.4 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

SAE J1979-2 describes the communication between the vehicle's OBD systems and test equipment required by OBD regulations. On-Board Diagnostic (OBD) regulations require passenger cars and light-, medium-, and heavy-duty trucks to support a minimum set of diagnostic information to external (off-board) “generic” test equipment.
To achieve this, SAE J1979-2 is based on the Open Systems Interconnection (OSI) Basic Reference Model in accordance with ISO/IEC 7498-1 and ISO/IEC 10731, which structures communication systems into seven layers. When mapped on this model, the services specified are broken into:
  • Diagnostic services (layer 7), specified in:
    1. ISO 14229-1
    2. SAE J1979-2 OBDonUDS
  • Presentation layer (layer 6), specified in:
    1. SAE J1930, SAE J1930DA
    2. SAE J1979DA
    3. SAE J2012, SAE J2012DA
    4. SAE J1939DA, SAE J1939-73
  • Session layer services (layer 5), specified in:
    1. ISO 14229-2
  • Transport layer services (layer 4), specified in:
    1. DoCAN: ISO 15765-2 Transport protocol and network layer services
    2. ISO 15765-4
    3. DoIP: ISO 13400-2 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 2:Transport protocol and network layer services
  • Network layer services (layer 3), specified in:
    1. DoCAN: ISO 15765-2 Transport protocol and network layer services
    2. ISO 15765-4 Requirements for emissions related systems
    3. DoIP: ISO 13400-2 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 2:Transport protocol and network layer services
  • Data link layer (layer 2), specified in:
    1. DoCAN: ISO 15765-4, ISO 11898-1, -2
    2. DoIP: ISO 13400-3 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3
  • Physical layer (layer 1), specified in:
    1. DoCAN: ISO 15765-4, ISO 11898-1, -2, in accordance with Table 1
    2. DoIP: ISO 13400-3 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3

More SAE standard pdf

SAE AMS5401C

SAE AMS5401C

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) Vacuum Melted, Vacuum Cast As Cast

$43.00 $87.00

SAE AMS6557A

SAE AMS6557A

Steel, Bars, Wire, and Forgings 9V - 5.25Cr - 1.3Mo (1.80 - 1.95C) Powder Metallurgy Product Hot Isostatically Pressed

$35.00 $71.00

SAE AS3504C

SAE AS3504C

INSERT - THIN WALL, SHORT, SELF-LOCKING, 1025 °F, SILVER PLATED ON INTERNAL SURFACES ONLY, UNS N07718, UNJ THREAD

$20.00 $40.00

SAE AS3229B

SAE AS3229B

RIVET - TUBULAR, UNIVERSAL, AS7228

$30.00 $60.00