• SAE J2968/1_202209

SAE J2968/1_202209

Measurement of Material Properties for Wet Friction Materials

SAE International, 09/30/2022

Publisher: SAE

File Format: PDF

$53.00$106.00


Published:30/09/2022

Pages:18

File Size:1 file , 930 KB

Note:This product is unavailable in Ukraine, Russia, Belarus

This SAE Recommended Practice is intended as the definition of a standard test, which may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use.

The specific purpose of this SAE Recommended Practice is to define a procedure to determine intrinsic properties of friction materials such as compressive modulus and rebound/recovery time at specific fatigue test pressures. Results from this test will both independently characterize the friction material and serve as input to the compression fatigue test.

NOTE: If this test is intended to determine the rebound interval for the compression fatigue test, then the maximum test pressure (Pmax) in this procedure must be selected with future fatigue testing levels in mind. It is important that the rebound time is sufficient at the maximum apply pressure to allow the matieral to rebound back to its original thickness.

Standard reporting processes are recommended. This procedure is intended for use by both suppliers and end users of wet friction materials.

More SAE standard pdf

SAE AS9501D

SAE AS9501D

BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A

$24.00 $48.00

SAE AMS3898/2B

SAE AMS3898/2B

Interleaf Carrier Material, Composite Tape Polyethylene Film, 0.0018 inch (0.046 mm), Unperforated

$20.00 $40.00

SAE AMS3898/6A

SAE AMS3898/6A

Interleaf Carrier Material, Composite Tape Differentially Coated Paper, Unperforated 0.0035 inch (0.081 mm)

$20.00 $40.00

SAE AMS3898B

SAE AMS3898B

Interleaf Carrier Material, Composite Tape or Broadgoods Paper, 0.004 inch (0.10 mm), Perforated

$38.00 $76.00