UL 1446

Please note: All interim revisions for this edition available at time of your purchase will be included.

Systems of Insulating Materials - General
UL 1446

Scope

1.1 These requirements cover test procedures to be used in the evaluation of Class 120(E) or higher electrical insulation systems intended for connection to the low voltage side of the distribution network where the voltage is limited to 1000 V or less and where the thermal factor and not transient overvoltages or partial discharge is the dominating aging factor. These requirements also cover the investigation of the substitution of minor components of insulation in a previously evaluated insulation system and also the test procedures to be used in the evaluation of magnet wire coatings, magnet wires, and varnishes.

Note: 1.1 revised January 30, 2008

1.2 These requirements do not cover a single insulating material or a simple combination of materials, such as a laminate or a varnished cloth, printed circuit boards, or planar transformers.

1.3 These requirements do not cover insulation systems exposed to radiation or operating in oils, refrigerants, soaps, or other media that potentially degrade insulating materials.

1.4 These requirements shall be modified or supplemented as determined by the applicable requirements in the end-product standard covering the device, appliance, or equipment in which the insulation system is used.